How to Clean and Maintain your Vacuum Cleaner

Buying a high-quality vacuum cleaner is an important financial commitment. Maintaining a clean vacuum is important for its effectiveness and longevity. Otherwise, your vacuum cleaner could quickly turn into an expensive nightmare.

Instead of waiting until the vacuum stinks to act, take these steps now to help avoid problems from occurring.

Steps in Maintenance of Vacuum Cleaners

Vacuum Maintenance that isn’t a Pain

After a few uses or after cleaning up a larger mess, it’s critical to give your vacuum cleaner a quick “checkup.”

Use these simple steps to establish a checklist that you can use each time to ensure the machine is always performing at its best.

No products found.

Empty it on a regular basis

Understanding how vacuum cleaners work may help you in proper maintenance of your vacuum cleaner. This is because the knowledge of the basic mechanism will help you to understand those basic dos and don’ts that will ensure your vacuum cleaner remains a reliable work horse.

The most common cause of vacuum cleaner issues is continuing to operate the machine with a full dirt canister.

Before each use, look at how much dirt has built up before each use. Things go bad, and you need to figure out how to remove the odor from your vacuum cleaner.

When you vacuum after the dirt bag or canister is full, the dirt will overflow into the air passage. Excess dirt particles are then discharged back into the atmosphere, obstructing the vacuum cleaner’s smooth circulation. That’s terrible news for the vacuum cleaner as well as your sinuses.

Empty your vacuum cleaner’s dirt bag or canister on a regular basis to maintain maximum airflow and suction strength. To make sure that you get a perfect clean every time you use it, the airways will stay clear.

Quick Tip: Cleaning the Canister

When using a bagless vacuum, you should empty, remove, and properly clean the canister on a regular basis.

Get a new dirt bag

If you are using a vacuum cleaner with a dirtbag, ensure that you replace it when it’s time. Cleaning the dirt bag isn’t enough, and it will probably get smelly over time as particles build up.

Do not wait until the level of dirt reaches its maximum capacity before you empty the dirt bag to extend the amount of time it can operate before it stinks.

As a general estimate of how often the dirt bag will need to be emptied, you should empty the bag when the dirt is roughly two-thirds full.

No products found.

Filter cleaning and replacement

Filters in the vacuum cleaner help to keep the environment hygienic and clean. There is less suction power when a filter is full. Unwanted dust particles can come back into the air.

Remove the filter after a few uses and lightly bang it against the trash can to get as much dirt out as possible.

Maintain optimal performance with frequent cleaning and occasional washings with water and a mild detergent for vacuum cleaners with reusable filters.

Quick Tip: Don’t reassemble right away

Before reassembling any filters into the unit, ensure that they are totally dry. This will keep mildew and mold from turning into difficult-to-get-rid-of odors.

Keep moving parts lubricated

Nowadays, there is a range of vacuum cleaner choices that have moving parts. This will ensure functionality and maneuverability. Brush rolls, spinning wheels, and swiveling heads are moving parts that require lubrication to function properly.

Lubrication between the connecting components will ensure smooth control of the cleaner. The reason is that it’s been used over time by people who like the convenience of a cordless stick vacuum with a swivel head.

To avoid becoming trapped in your tracks during the cleaning process, rotate and lubricate the vacuum brush head rolls and wheels rolls to ensure smooth movement and rotation. Moving parts should be lubricated to make sure the unit works at its best and that you have an easy time cleaning.

No products found.

Check for clogs in the air passages

If a vacuum is not consistently maintained after several cleanings, debris and dirt particles build up within the inside part. Where air circulates, like hoses, filters, and nozzles, they are the biggest culprits for storing the most unpleasant dirt buildup.

Look at the primary locations where dirt and debris build-up tends to occur. To better look at areas that are difficult to see, like the hose, use a mobile phone flashlight app or flashlight.

Rather than waiting for the odor to emit from your vacuum cleaner, check all the air tubes for obstructions and clogs on a regular basis. You can use tools and some household items to help poke out any obvious clogs and obstructions inside the passages.

Search for obvious debris and dirt in the main areas where it tends to accumulate. You can use a smartphone flashlight app or flashlight to get a good look at parts that are hard to see, like the hose.

If you have a wet vacuum cleaner, you might try passing clean water through the hose to see if there are any obstructions or dirt build-up.

Untangle the brush roll’s hair

More than any other household gadget, vacuum cleaners take on some of the most challenging cleaning duties. In the meantime, attempting to repair vacuum cleaner problems is one of the hardest tasks, and many people would rather stay away from it.

In general, the brush roll in the unit’s head will take the brunt of the damage. The brush roll’s main job is to remove the most stubborn dirt and debris from a carpet’s deepest fibers.

During cleaning, the brush roll will frequently cling to pieces of animal fur and hair strands that become tangled in the bristles, preventing it from revolving. Carefully take out any tangled fur or hair that has become lodged in the bristles with a pair of scissors.

Quick Tip: Detangle as often as possible.

After each use, inspect the state of the brush roll to ensure it turns freely for the best cleaning results. The more debris there is, the more difficult it will be to clean the bristles.

Examine for signs of wear and tear

The equipment will wear and tear over time, whether you use it for general floor cleaning or as a ceiling cleaner. Checking for damage on a regular basis is the best way to make sure that the vacuum works well for many years to come.

If you vacuum up a few pebbles throughout your cleaning routine, this is a great example of when you should check for malfunctions or cracks.

Any roughness or cracks in the vacuum cleaner’s body are certain symptoms of potential harm, and you should address that right away. If you’re not sure whether you need to repair or replace your vacuum, ask a skilled electrician or repair person.

Repair or replace any damaged parts

It’s never a good situation to find yourself with a damaged vacuum cleaner. Even if the device is still functional, using a vacuum cleaner with damaged parts can pose a risk of injury or potential hazards.

It is never a good idea to use a damaged vacuum, regardless of how minor the damage may be. For example, a worn cord might cause electrocution, fire, or even death if not noticed.

Using a faulty vacuum is not the best decision and could be a financial or safety problem. Before using the vacuum for any purpose, make sure you replace or repair any broken parts.

No products found.

Examine the belt’s condition

The vacuum cleaner’s brush roll is held in position by the belt, which rotates at the right angle. It’s crucial to inspect the belt on a regular basis for flawed fitting, cracks, and unevenness, which might signify the start of major damage.

Keeping an eye on the vacuum cleaner belt’s condition can help you prepare when it’s time to repair or replace it. Check if the belt is tight enough; if it isn’t, you should replace it immediately.

Quick Tip: Replace your tires every two years.

As a general rule, you should replace the belt every six months as a general rule.

Service the vacuum cleaner

To help with the care of your device, most local shops offer repair and maintenance services. It is important that you have a professional inspect your vacuum cleaner. This is because there are possibly certain issues that you won’t be able to spot on your own.

It’s not necessary to wait until the vacuum stops sucking up dirt or smells before servicing it.

It’s a great idea to take the vacuum to an expert for maintenance every few months to make sure it keeps working as the best vacuum cleaner for a long time.

When Using a Vacuum Cleaner, Follow This Checklist

Here are some safety precautions to keep in mind when operating a vacuum cleaner.

  • When the vacuum cleaner isn’t in use, make sure you unplug it. This practice protects the cord and prevents mishaps.
  • To clean up wet surfaces, use a wet and dry cleaner. Any other appliance will cause the motor to fail and increase the danger of electric shock.
  • When using a vacuum cleaner, do not pick up sharp things like coins, screws, or nails.
  • To minimize damage, carefully store the vacuum cleaner’s cable in a secure location.
  • Store the vacuum somewhere cool and dry.
  • Do not let the vacuum cleaner fall. If you drop it, ask a specialist to inspect it before you use it.
  • Do not use a vacuum cleaner to clean poisonous or combustible objects.

No products found.

Is it necessary to disinfect a vacuum cleaner?

A lot of household dirt settles on the floor, and where there is dirt, there are usually bacteria. As a result, it may be useful to sanitize the base of the cleaning head and the dust bin of a bagless vacuum cleaner on a regular basis.

This is particularly true if you have kids or pets in your home who may come into contact with dust and other nastiness on the floor and might be those who track it around your home. If there is somebody unwell in your house, disinfection is necessary as well.

Always go through the handbook first, though. Some manufacturers advise against the use of detergents or other chemicals in the vacuum. Instead, they recommend that you use a little wet cloth or only water to clean it.

If disinfecting is permitted, isopropyl alcohol is a nice choice. This is because it is effective and quick-drying, but any household disinfectant spray or liquid would do. Make sure the motor compartment doesn’t come into contact with any disinfectant.

If using a disinfectant isn’t recommended, or you are unsure, using a towel or a thorough wipe is still the best option and will help eradicate germs. Before reassembling and operating the vacuum cleaner, make sure everything is dry.

Conclusion on Vacuum Cleaner Maintenance

When it comes to properly maintaining your vacuum cleaner, the most important thing to remember is that you should make sure it stays clean.

A few minutes of maintenance work will extend its life by years and make it perform more smoothly and efficiently.

Replacing a vacuum cleaner is costly, but keeping it in optimal working order is rather simple if you follow the instructions above.