How to Clean a Juicer Step by Step

 

If you want to make healthy juice daily that you and your loved ones will enjoy, you should have the best juicer to do the work for you.

In case you leave the juicer dirty for a couple of hours or even days after every use, you’ll see that the residue in it will get hard and sometimes, even cause a buildup of bacteria to occur.

So, cleaning up the juicer immediately after every use can help in keeping it working effectively for longer and at the same time help in promoting body health.

Step one: Unplugging the juicer

It is hazardous to clean the juicer without first unplugging from the power connection. So, the first step when cleaning up the machine is for you to unplug from the mains.

This will ensure that you don’t get any cuts or other injuries or even suffer the scary and life-threatening electric shocks. This step is also important for purposes of preserving your machine.

Step two: Disassemble the parts

It’s not good to wipe the juicer with all the parts connected to it or only clean the outside only. If you want to clean it in this manner, then many of the appliances won’t get a thorough cleaning.

Ensure that you disassemble all parts so you get into the difficult to reach spots and properly cleanup the concealed bacteria and grime polluted areas. When done well, the juice extractor will appear new once more.

Step three: Removing the pulp

Your juicer features a container for catching all the pulp you don’t need. Take out and empty this container. Then using a spatula, get rid of any remaining pulp.

You should also ensure that you thoroughly wash it until it is pristine clean, so no buildup will remain.

If there is gunk and other buildups in it, ensure that you use enzyme remover, white vinegar, some salt or other natural cleaners to clean it and leave it smelling great.

Step four: Thoroughly rinsing every component under running water

After dismantling the juicer, use running water to thoroughly rinse the juicer’s components.

Based on how unclean the machine is, you can also use other things like mild dish washing soap to do the cleanup process.

Step five: Use a brush to clean the parts

For gaps in the pieces of your juicer that you cannot reach with your hand, use your small cleanup brush to reach those areas.

The nail brush and toothbrush will clean those difficult to get to the gaps and corners.

Step six: Soak the parts in the water and dish soap solution

You can loosen grime and dirt fast by soaking the different parts in water and dish soap. So, let the attachments soak for some time and then apply the soft brush, soft cloths or toothbrush to finish the work.

Step seven: Clean the strainer well

The mesh strainer often attracts sticky grime and even pulp to it. For this reason, you should give it the best attention when washing the different parts of the juicer.

Actually, if you let particles of your juice to dry in the strainer, you’ll certainly have an issue getting rid of the debris from it. Times taken to clean your strainer well is time well spent.

Step eight: Wipe the juicer

While you leave the different components soaking in the water and soap, you can utilize that time by using a damp soft cloth or wet sponge to wipe the rest of the machine.

Ensure that you run the cloth or sponge over the whole juicer, so you don’t fail to spot anything.

Step nine: Let it dry

When you’ve finished cleaning up, place the juicer parts on a kitchen rack or towel to dry. For a quicker drying time, wipe down all the parts dry with a clean dry hand towel.

Step ten: Put the parts back together

You should ensure that the parts are all dried before you put all the parts together. Once the parts are all dry, assemble them.

Depending on how often you use your juicer, you may need to consider your storage arrangements to ensure your juicer remains clean.

If not regularly used, store your juicer in cabinets where it will be protected from accumulated dust, grime or food splatters.

Step eleven: Time to juice again

Now that you’re done with cleaning the juicer, you can begin enjoying freshly squeezed juice once more. You should ensure that you clean up parts immediately or shortly after every use to prevent stubborn stain from forming on them.

Having all the useful information you need on the best way of cleaning a juicer will ensure you enjoy clean surroundings.

You will also enjoy long service from a food processor that will keep making healthy juices that will benefit your body.

Rather than getting 50 percent or sub-par service from the juicer, with good regular cleaning, you’ll have 100 percent service.

An excellent performing clean juicer will consistently deliver smooth great tasting veggie and fruit juices which will keep your body well nourished.

Information is power. Now that you know the way to clean up a juice extractor, you will enjoy the cleaning process and are unlikely to reduce the lifespan of your juicer by leaving it dirty for long after every juicing session.

How do you clean your juicer screen?

A common reason for a juicer performing poorly is because of a clogged screen. Keeping the juicer screen clean can enable the juicer to work like a new machine and reduce strain on the motor.

Here are tips to keep the juicer’s screen clean:

1. Cleaning a clogged juicer screen

You can often clean a clogged screen by soaking it in a solution of water mixed with citric acid and vinegar for at least a couple of hours. After you soak the juicing screen, use a toothbrush or cleaning brush to scrub and then rinse it.

2. Clean the juicer screen right away after juicing

Not cleaning up the juicer right away after juicing causes clogging of the screen. If you leave the cleanup work for later, juice residue and small pulp bits can dry, sealing the fine holes.

It’s easier to clean up the screen before it dries. If you cannot clean it up right away, at least place the juicing components into a bowl of water until you get the time to clean them.

3. Use a strong light source

Looking through a strong light source is the best way of seeing if the juicer’s screen is clean.

The screen may look clean when it’s mounted on the juice extractor; however, you might get surprised to see a lot of clogged holes when holding it up to a strong light source, even if you’ve been cleaning it up frequently.

This is particularly common in juicing machines with a fine screen for root veggies and hard fruits, since the holes are quite tiny.

4. Use a towel to clean up the screen

There’s some mineral content in most tap water, either due to minerals that added to improve taste or due to naturally occurring minerals.

If you allow the juicer screen air dry, mineral deposits will form in the fine screen’s sieve holes. To prevent this, ensure that you use a towel to manually dry the screen.

If there’s high mineral content water where you reside, ensure that you wipe the juicing chamber and feeding tube also to avoid mineral deposit staining.

Juicer cleanup hacks

Cleaning up a juice extractor should not take long. But taking note of the juicer’s details can make sure that you do not waste time scrubbing the screen and all the parts.

You should soak the juicing screen for 15 minutes in 9 parts of water and one-part lemon juice before you use a toothbrush or other appropriate brush to scrub.

Using baking soda to clean a juicer will ensure you have a sparkling screen. Just sprinkle the juicing screen with baking soda and use vinegar to spray it down.

The ensuing bubbles will consume food particles clinging to the juicer screen. Use lemon and a toothbrush to clean up the juicer screen daily.